Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the Latest Thruster® Retrogade Giveaway coming soon: 5/7


Brake lever problem
#1
I recently finished restoring an old 1991 Diamond back Allure Hybrid. It came out pretty nice, I had it sandblasted and repainted it a candy apple red, couldn't get the matching handle grips though and I had bought them before the paint was finished. Anyway I am having an issue with the rear brake lever, it does not seem to spring back into place as well as the front brake and has a bit of play in it. What adjustments could I be forgetting about?
  Reply
#2
3 areas to look at:<br />
1) The brake lever pivot. Without the cable attached this should be loose but not sloppy.<br />
2) The cable for binding. It should slide back and forth without drag.<br />
3) The cantilevers. These should be free to pivot but not sloppy. The pivots could bind. You may be able to increase the spring tension to increase the release pressure but obviously will require more force to operate.
Unclip the straddle wire at the rear and pull on the cable from the brake lever.<br />
With the other hand operate the brake lever and this should give some idea if it's O.K. or not.<br />
Squeeze the cantilevers together and again you should be able to check for good movement.<br />
Also check the run of the cable and that everything is inline with no kinks.
Some brake levers had an "assist" spring in them to help return it but compare with the other lever to see if they are the same.
Lastly make sure that the cable "barrel" end fits properly in the brake lever. If not it could interfer with the return of the lever

Ride hard or ride home alone!
  Reply
#3
Thanks, UK it was the brake lever itself. I unhooked it and it was sloppy so I tightened it up just a bit and that solved my issue. I am returning that bike to it's owner today, she is not going to recognize this bike, it used to be a dingy old flat black with faded yellow stickers, it was all rusty and not rideable. I'm hoping for a good reaction.

  Reply
#4
Nice job Jordan!<br />
I'm sure she will be very pleased.

Ride hard or ride home alone!
  Reply
#5
It went very well, she actually did not believe that is was the same bike she had dropped off. So I felt pretty good. She rode it on a bike ride with all her freinds the next day and they all liked her "new bike"

  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
2,977
09-01-2021, 05:11 PM
Last Post: Lemon
 
2,545
03-08-2020, 02:34 PM
Last Post: G_M
 
Quixy
3,657
06-27-2016, 04:53 PM
Last Post: DaveM
 
10,457
01-06-2014, 08:23 PM
Last Post: 1FJEF
 
34,876
08-28-2013, 11:05 AM
Last Post: sidmarx
 
14,393
06-15-2013, 10:38 PM
Last Post: Painkiller
 
46,016
02-24-2013, 12:27 AM
Last Post: adarsh
 
12,791
09-15-2012, 10:37 PM
Last Post: RobAR

Forum Jump:

[-]
10 Latest Posts
Vilano Warning
Yesterday 08:38 PM
Cycling in the Wind
Yesterday 05:04 PM
Oakley lens peeling
Yesterday 01:30 PM
1995 Specialized Rockhopper FS Comp A1
Yesterday 05:49 AM
Problems with new 3x7 trigger shifter (S...
05-04-2024 12:32 PM
Second RSX hydraulic brake caliper fails...
05-03-2024 02:34 AM
What tools have you bought recently?
05-02-2024 12:40 PM
(sorta kinda) NBD Genesis CdF 20
05-02-2024 12:37 PM
Trying to identify this frame.
05-01-2024 10:57 PM
Identify Scott Genius MC
05-01-2024 10:51 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
23 posts
no avatar 2. enkei
19 posts
no avatar 3. Amanda_W
16 posts
no avatar 4. GirishH
14 posts
no avatar 5. Nutribun
11 posts