Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Noobie - Adjusting Mechanical disk brakes, brake lever is loose
#1
Can anyone help me fix a mountain bike I just bought? I'm having trouble getting the front brakes to work (mechanical disk brakes) and first thing is when I loosen up the caliper bolts the brake still doesn't work, and the cable leading from the brake lever to the actual caliper is very loose, pics included, does anyone have any idea what to do?

So sorry if this is something incredibly simple to fix or if I'm wasting time ahaha.
Oh also, the wire leading from the front brake lever actually runs past the wheel which causes it to brush against it which I think could potentially cause problems, will I have to rewire it?
Reply
#2
For starters, let's get it assembled correctly. Your fork is on backwards. The arch goes to the front with the caliper and rotor on the left. You'll need to loosen the stem to do this.
Once that's done, snap a pic of the cable attachment at the caliper and post back!
Wheelies don't pop themselves. (from a QBP fortune cookie)
Reply
#3
(07-07-2012, 03:26 PM)RobAR Wrote:  For starters, let's get it assembled correctly. Your fork is on backwards. The arch goes to the front with the caliper and rotor on the left. You'll need to loosen the stem to do this.
Once that's done, snap a pic of the cable attachment at the caliper and post back!

Apologies but how do I swap the forks position? It looks welded on. Also I managed to sort out the brake wire's position but it is still loose.
Reply
#4
Since you just bought it, take it back and have them do the reassembly properly. This should not be your problem to fix.
Reply
#5
(07-07-2012, 04:22 PM)RBurrelli Wrote:  Since you just bought it, take it back and have them do the reassembly properly. This should not be your problem to fix.

It came in parts, the fork and brake lever were already fitted however, should I still take it back?
Reply
#6
Forgot to add thanks for all the input so far!
Reply
#7
Bikes are shipped with forks backwards to meet shipping regulations (smaller box). Loosen the stem (the part that holds the bar) at either the steerer tube bolt(s) or there may be a bolt on the top. Turn the fork around and retighten.
Wheelies don't pop themselves. (from a QBP fortune cookie)
Reply
#8
Boss - chk this out ... http://www.sheldonbrown.com/gloss_ha-i.html#headset ... scroll about halfway down the page to 'Headsets' and tell us which yours looks like.
Wheelies don't pop themselves. (from a QBP fortune cookie)
Reply
#9
(07-08-2012, 12:17 AM)RobAR Wrote:  Boss - chk this out ... http://www.sheldonbrown.com/gloss_ha-i.html#headset ... scroll about halfway down the page to 'Headsets' and tell us which yours looks like.

Ahh thank you for all your help, I actually ended up taking it to a local shop and they managed to fix it for me free of charge, they said the front brake was manufactured incorrectly and the whole thing had to be re-fitted, thank you again though!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Brake cable loose from barrel adjuster knl 0 2,763 07-22-2015, 10:43 PM
Last Post: knl
  Shifters, v-brake, disc brakes.. confused.. BennettOZ 5 5,177 04-28-2015, 10:39 AM
Last Post: painkiller
  At Brake Lever on Handlebars... Adjuster JanJ 15 5,180 01-11-2015, 03:54 PM
Last Post: JanJ
  How to fix old dual lever brakes- plastic spacer broken Justine 2 3,857 04-21-2014, 02:31 PM
Last Post: 1FJEF
  Brake lever spring sab456 8 8,872 10-10-2013, 10:49 AM
Last Post: sab456
  Adjusting brakes and pads PBells 2 3,383 09-13-2013, 11:58 PM
Last Post: 1FJEF
  Hydralic disc brake lever pull Adrian888 2 4,746 08-30-2013, 05:21 AM
Last Post: Adrian888
  Loose brake lever krisplank 7 11,473 08-28-2013, 03:05 PM
Last Post: sidmarx
  Brake lever sticks lgvincent 4 6,555 09-16-2012, 02:37 AM
Last Post: RobAR
  Shifter Brake Lever Combo Upgrade Icemanxxxv 1 3,986 08-26-2012, 12:34 PM
Last Post: RobAR

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed