Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Chain rides up on sprocket teeth
#1
I removed and replaced the cassette on my bike (making no changes).  Now I find that when the wheel is under load the chain climbs up on the teeth of the smallest sprocket (see photo).[Image: dpy7uc.jpg]
Everything works fine with the other gears or when the wheel spins freely.  This seems to be the *opposite* effect I'd expect if the chain had stretched or the gear teeth were worn.  Instead, the pitch of the chain seems too short, not too long.  Can anyone explain what's happening and how I can fix it?
Reply
#2
something does not look right about the high gear on that cluster. I would mention it is best to replace the chain and cluster at the same time. but your problem is typical of a worn chain or cluster or both.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
Reply
#3
Please post some more pictures, at least one from a bit further back.

To me, it MAY be that the chain is too long for the RD to completely take up; it looks like you have the chain on the smallest chainring in addition to the smallest cog at the back - not recommended.
Nigel
Reply
#4
Thanks for your suggestions.  I check the chain and it is not worn; also, the problem occurs with the chainwheel in either gear.  I've done some more investigation in the meantime and have concluded that the sprocket is indeed worn.  In case it helps anyone else, I found the Sheldon Brown article on "Chain and Sprocket Wear" quite helpful, as always.  With the wheel off the bike, I draped the chain over the smallest sprocket and pulled downward on the right side of the chain.  When I flipped the first engaged chain link on the left free of its tooth with my finger, the chain jumped forward just slightly.  This means the first tooth was doing all the holding, which, as Sheldon Brown says, is symptomatic of a worn sprocket.  Time to replace the cassette, I'm afraid.
Reply
#5
Fortunately, cassettes are inexpensive, and you now have an opportunity try a different one.
Nigel
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Chain comes off the rear small sprocket on back peddling? elmore leonard 7 5,110 04-06-2015, 07:56 PM
Last Post: elmore leonard
  Gear teeth number Darthvader 1 1,663 07-21-2014, 12:20 PM
Last Post: cny-man
  Chain wheel and rear sprocket unaligned. Help? CustomStolen 4 4,574 02-11-2013, 09:03 PM
Last Post: 1FJEF
  Chain/Sprocket problems The_Istrian 3 5,922 10-06-2012, 04:00 AM
Last Post: Bill
  Chain not engaging sprocket correctly iskanda 4 14,266 10-24-2011, 02:05 AM
Last Post: biciloco
  Please Help, Chain catching on gear/sprocket Hoffman 3 8,573 09-13-2010, 04:31 AM
Last Post: DaveM
  Another case of chain riding on tips of teeth j beede 9 8,559 01-30-2010, 04:48 AM
Last Post: j beede
  Chain falls off continuously on rear gear sprocket. beanneil 3 10,734 10-11-2009, 01:44 PM
Last Post: Bill
  Chain Stays On Small Sprocket pomondn 1 6,154 08-13-2008, 01:05 AM
Last Post: Alex Ramon

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed