Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the Latest Thruster® Retrogade Giveaway coming soon: 5/7


Clicking when pedaling on bike.
#1
Hi guys! I have an issue where I am getting a cranking noise ONLY when I’m on the bike pedaling. Does not happen when I spin the wheel. It seems to be louder when the bike is under more load. For example, if I go from stationary to pedaling in the smallest cog. It sounds like it’s coming from the derailleur, cassette area. I will link pictures of that area. Thanks in advance!

Pics - https://imgur.com/a/mYBnnwj
Video of noise - https://streamable.com/pveskk
  Reply
#2
(05-28-2020, 09:31 PM)mrich6347 Wrote:  Hi guys! I have an issue where I am getting a cranking noise ONLY when I’m on the bike pedaling. Does not happen when I spin the wheel. It seems to be louder when the bike is under more load. For example, if I go from stationary to pedaling in the smallest cog. It sounds like it’s coming from the derailleur, cassette area. I will link pictures of that area. Thanks in advance!

Pics - https://imgur.com/a/mYBnnwj
Video of noise - https://streamable.com/pveskk

It sounds like a chain/cog problem, as though the derailleur isn't adjusted properly. Spinning the wheel so that the chain isn't moving, and the noise not being there, strongly suggests the problem is in the derailleur adjustment. Was it working okay and then the noise just suddenly started? Did you install a new derailleur? Did you put a new chain on, and it's not the right one for the cogs? (i.e. a 10 speed chain on a 7 speed cassette).

I take it that the noise only happens with the chain on the smallest cog. If so, then the high limit screw needs adjusting. But you really need to adjust the low limit screw, too, and index the derailleur.

Do you know how to adjust the derailleur, including indexing it on the intermediate cogs? Park Tool has a video to show you how to properly adjust a derailleur. You need to have the back wheel off the floor to adjust it. It's not a difficult job to do but if you never did one, before, it can be confusing. If you run into difficulties, a bike shop should be able to adjust it for you in just a few minutes.
If I knew how to ride a bike properly, I'd do it every time.
  Reply
#3
Could be anything, really... in my experience it can be really difficult to pinpoint the source or even the area.

Apart from Charley's suggestions (do that first), check the pedals for play and the bottom bracket. Noise getting worse under load is typical for these. Heck, I've got a saddle that would fit your description (Fi:zik saddles are or at least were notorious for that).

Edit: check the older threads for more troubleshooting suggestions, e.g. by painkiller or Nigel Misso.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Do you have a four foot rule?
Today 12:32 PM
Oakley lens peeling
Today 01:20 AM
1991 Bianchi Boardwalk - Selling advice
Yesterday 01:21 PM
1995 Specialized Rockhopper FS Comp A1
Yesterday 10:30 AM
Just Joined
Yesterday 10:14 AM
Cycling in the Wind
Yesterday 10:03 AM
New hip fracture, looking for some words...
Yesterday 09:32 AM
Vilano Warning
05-06-2024 08:38 PM
Problems with new 3x7 trigger shifter (S...
05-04-2024 12:32 PM
Second RSX hydraulic brake caliper fails...
05-03-2024 02:34 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
25 posts
no avatar 2. GirishH
21 posts
no avatar 3. enkei
19 posts
no avatar 4. Amanda_W
13 posts
no avatar 5. Nutribun
13 posts