Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Tubeless going flat
#1
Hey guys,

My tubeless tire keeps going flat. The air comes out near the rim/valve as you can see here:

[Image: 20170202_102556.jpg]

I have tried to tighten the valve screw and turn the wheel around so the latex would cover the inside, but without much success.
Reply
#2
Install a new valve, make sure area around hole is smooth.
Never Give Up!!!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Air leak from valve stem with tubeless setup mrbiggles 3 2,946 07-06-2015, 11:55 PM
Last Post: mrbiggles
  Why do I get so many flat tires? PistolSlap 7 11,045 10-05-2014, 02:26 PM
Last Post: cny-man
  Flat spots on both tires (new!) reddox 20 23,814 08-10-2014, 05:03 PM
Last Post: cny-man
  Good Tube keeps going flat jsph.han 3 3,004 07-26-2014, 10:13 PM
Last Post: cny-man
  Went tubeless. fishboy316 2 2,431 06-01-2014, 02:44 AM
Last Post: fishboy316
  Survey for development of tyres that never go flat pierrenomas 0 2,366 10-12-2013, 04:26 PM
Last Post: pierrenomas
  Tubes Flat on Inside Radius Sparky 2 4,629 11-26-2011, 06:15 AM
Last Post: froze
  Flat tyre despite new inner tube? hiker biker 6 15,442 05-08-2011, 01:29 PM
Last Post: hiker biker
  Flat sections on new tyres?? tommy27 1 4,649 01-14-2011, 03:19 PM
Last Post: DaveM
  Tubeless Tyres and Wheels mcfchris 6 6,968 12-30-2010, 03:26 AM
Last Post: Jordan300

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed