Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the Latest Giveaway coming soon


Creative bike mechanics (freehub) [Solved]
#1
Just wow, this calls for the bicycle repair photo of the month prize! Big Grin
As this bike rider himself explained, his friend's freehub turned fixie during the ride, and they used such creative tool to get the 16mm nut out of the hub.

   
  Reply
#2
Mercy, ha
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
(08-04-2019, 07:39 AM)Zviedrs Wrote:  Just wow, this calls for the bicycle repair photo of the month prize! Big Grin
As this bike rider himself explained, his friend's freehub turned fixie during the ride, and they used such creative tool to get the 16mm nut out of the hub.
I recently replaced the freehub on my Specialized Fatboy. It required a 12mm hex wrench, and hardware stores don't sell anything bigger than 10mm, so I had to order it, online.

Trying to turn the wrench with a piece of pipe, didn't work. Probably needed a longer pipe but I was afraid of doing damage to something. So I put the wrench in a vise and lowered the wheel onto it. Had to jerk it counterclockwise a few times until it snapped free. I don't know why they tighten the nut so much. When I put it back I tightened it but not so hard that it was almost impossible to undo. After tightening it, I was able to loosen it again, with the aid of the short piece of pipe. Ridden it another 1,000 miles since then, and no problems.

My freehub hadn't turned fixie but while wheeling the bike out, one morning, I became aware that the pedals were turning. I expect that when pushing the bike backward, but not when pushing it forward. I had to think about it because I never noticed the pedals turning, before, and I ride it every morning.

I removed the freehub and it seemed fine. Screwing it back onto the hub, and it was a little stiff if I tightened the lock ring properly. By loosening the lock ring so that it was barely holding, the freehub turned freely. Apparently over 5,000 miles had put a bit of wear on it. Got the new freehub, tightened it properly, and the pedals no longer turn while pushing the bike forward.

I'm thinking I might have suffered a fixie, too, before long.
If I knew how to ride a bike properly, I'd do it every time.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
10,815
07-31-2015, 08:34 PM
Last Post: Painkiller
 
15,419
01-27-2015, 03:36 PM
Last Post: nfmisso
 
19,818
05-23-2013, 11:21 AM
Last Post: mmontero
 
9,850
01-26-2013, 01:29 PM
Last Post: 1FJEF
 
10,572
10-12-2010, 07:15 AM
Last Post: KC-Steve
 
21,471
09-14-2009, 04:12 AM
Last Post: Joe_W

Forum Jump:

[-]
10 Latest Posts
Oakley lens peeling
Yesterday 01:47 PM
1995 Specialized Rockhopper FS Comp A1
Yesterday 01:31 PM
Cycling in the Wind
05-04-2024 01:49 PM
Problems with new 3x7 trigger shifter (S...
05-04-2024 12:32 PM
Second RSX hydraulic brake caliper fails...
05-03-2024 02:34 AM
What tools have you bought recently?
05-02-2024 12:40 PM
(sorta kinda) NBD Genesis CdF 20
05-02-2024 12:37 PM
Trying to identify this frame.
05-01-2024 10:57 PM
Identify Scott Genius MC
05-01-2024 10:51 PM
Just Joined
05-01-2024 09:57 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
22 posts
no avatar 2. enkei
21 posts
no avatar 3. Amanda_W
16 posts
no avatar 4. GirishH
14 posts
no avatar 5. TrailJoe
11 posts